Product Description
·The thickness range:0.008-2.0mm
·The width range:300MM-2500MM
·For film with 0.2mm(inclusive)thickness or above,we can provide a number of lines,and we can also
develop and produce special lines under the requirements of our customers
·Polyester,polyether(type of resistance to hydrolysis,type of resistance to yellow,type of waterproof and
moisuture permeable,medical grade,food grade,anti-stactic grade,ect.,with many specifications available)
·Cold resistance:Huanlong TPU film with general specifications can resist cold until to -30℃ and some
special specifications to -40℃
·Wear-resisting property:our film with such characteristics are better than rubber
·Other elastic materials are inimitable to Huanlong TPU film in terms of strength,toughness and elasticity.
·Huanlong TPU film is of no plasticity,and no precipitation
·The molecular structure of Huanlong TPU film(carbon,hydrogen,oxygen,nitrogen)is simple,which makes
the burning of Huanlong TPU film causes no air pollution.When Huanlong TPU film are buried into soil,it is
degradable within 3-5 years under suitable temperature and with the effectiveness of microorganisms
·Excellent tensile properties、no plasticizer、low temperature flexibility、high temperature and oxidation
resistance、oil and chemical resistance、better bacterial barrier and moisture permeability.
Products Application
This serie is widely used in shoes and bags,as the film of abrasion resistant, environmental friendly and soft
-ly,it can be used to make the vamp and trademark logo、insoles、desinger bags etc.
TPU Leather Performance | ||||
Properties | Testing standard | Requirement | Unit | Result |
Appearance | Q/ZB03.6802A-2016 | △E≤0.8 | ﹍ | 0.11/0.06/0.1 |
Weight | GMW3182 | 600 80 | g/m2 | 640/652/642 |
Thickness | ISO2589 | 0.75 0.1 | MM | TPU:0.38 |
Tensile Strength | GMW3010 Code H | CD≥200N | N | CD:437/32/429 |
MD≥201N | MD:477/452/439 | |||
Elongation ratio | GMW3010 Code H | CD≥50% | % | CD:182/183/180 |
MD≥30% | MD:110/113/115 | |||
Constant load growth rate | GMW3211 | CD≥20% | % | CD:50/49.3/50.6 |
MD≥5% | MD:6.6/6.4/7.3 | |||
Residual deformation rate | GMW3211 | CD≤20% | % | CD:8.6/11.3/12 |
MD≤10% | MD:3.0/2.0/3.3 | |||
Tear strength | ISO 13937-2 | CD≥20 | N | CD:67/68/67 |
MD≥20 | MD:71/57/64 | |||
Peel strength | GB/T8949-2008 | CD≥25 | N | CD:80/82/83 |
MD≥25 | MD:87/88/85 | |||
Colorfastness to crocking | ISO105-X12 | ≥4 | Grade | 4--5 |
Washing resistance | GMW3402 PROCEDURE A | ≥4 | Grade | 4 |
Non adhesion | GMW14132 | No change in surface | ﹍ | PASS |
Color fastness to light | GMW 14162 CYCLE B | ≥4 | Grade | 4 |
High temperature aging | GMW 14124 CYCLE Q | No change in surface | ﹍ | PASS |
Low temperature resistance | GMW 14126 | No change in surface | ﹍ | PASS |
Folding fastness | GMW5402 | CD:10000cycles MD:10000cycles | ﹍ | PASS |
Odour test | GMW3205 | ≥6 | Grade | 6 Grade |
Banned substance | GMW3059 | Pb、Cd、Hg、Cr6+(Nonmental)≤2g/kg/Cr6+(metal)≤0.02µ g/cm 2/PBBs、PBDEs≤5mg/kg/ | ﹍ | PASS |
Cryogenic bucking resistance | ISO 5402:2011 | "-30℃ 100000cycles | ﹍ | PASS |
VOC&SVOC | GMW15634-2014 | ﹍ | ﹍ | PASS |
Note:The above data for refeence only.
Storage
keep in dry and room temperature.
Package
According to the client requirment,by roll.